What are the Specifications for the SpectroVision?

What are the Specifications for the SpectroVision?

SpectroVision Specifications

Measurement technology: Spectral remission and color density determination to ISO 5-3/4
Measurement geometry: 45/0° to DIN 5033
Spectral range: 400 to 700 nm in 10nm steps
Measurement conditions: ISO 13655:2009 M0 – No filter, UV included M1 – Daylight, D50 M2 – UV Cutoff filter, UV excluded
Press speed: Up to 5,000 ft/sec
Color bar scanning: Up to 100 Patches (5mm)
Data refresh: Every 5-10 seconds
Measurement aperture: 3.0 mm x 3.0 mm
Distance from media: 3mm
Light source: LED pack
Short term repeatability: 0.05 Eab on white BCRA tile
Inter instrument agreement: 0.30 Eab average on BCRA tiles
Calibration: Automatic on integrated ISO white reference plaque
Operating environment: 0° to 40° C (non-condensing humidity)

    • Related Articles

    • Do you provide printable color bar images that the spectrodens can read in scan mode?

      Do you provide printable color bar images that the spectrodens can read in scan mode? Yes. We provide a sample press sheet with every SpectroDens and this press sheet has color bars that can be scanned with the SpectroDens.

    • Can I replace an older RS400 unit on a Ryobi press?

      Unfortunately, we do not have any RS400 vintage units remaining in stock. Replacing an older RS400 is possible, but it requires a fresh Closed Loop installation in order to interface with the press. This means installing a new SpectroDrive or ...

    • What is the difference between Open Loop (Expresso) and Closed Loop (PressLink)?

      Let’s begin by defining the two approaches in plain terms: Open loop (or “open loop control” / “open loop color process control”): In this configuration, a measurement system is in place (for example a scanner or spectrophotometer measures the ...

    • Compare delta E on the SpectroDens

      The SpectroDens provides various delta E equations for different applications: dE CIELAB (dE76, dEab) dE CMC dE CIE94 dE 2000 (dE00) - most common To compare printed color with a reference, please set your SpectroDens to "CIE L*a*b* " function from ...

    • Loading Color library on the SpectroDens

      There are 3 different ways to create Color Book (CB) on the TECHKON SpectroDens. Measure any physical sample/swatch/proof/drawdown under the device Reference tab Use the Up / Down arrow key on the device and go to the Reference tab Press Enter and go ...